3D Domed Gel Custom made to fit SUBARU Scooby Doo Wheel Centre Cap Badge SINGLE
In many sizes.
They come in this stunning design, weather proof and self adhesive to stick on to your cherished Subaru aftermarket alloys.
Flexible, UV & scratch resistant resin will not fade or go cloudy in direct sunlight.
These badges will withstand hot jet wash and chemicals commonly used to clean alloy wheels.
These badges are hard to get hold of and are only available in a limited supply.
Domed stickers decals/badges are covered with up to 4mm thick, transparent, polyurethane coating for a 3D look. They are semi-flexible, scratch resistant , flat on the back and must be fitted to a clean, smooth surface but can be applied to slightly curved surfaces, if curve is greater than 1mm-2mm depth from the center to the outer edge depending on the overall diameter then additional adhesive may be required.
Some colours may appear slightly lighter when combined with our 3D Domed Gel. This is due to the light reflecting within the 3D Domed Gel coating.
Please note: All our 3D domed gel custom wheel badges are handmade, therefore, there may be imperfections and differences on positioning for each and every badge.
These aftermarket 3D Domed Gels are custom made to order and are not a stock item, therefore not covered by the distance selling act.
If you are unsure what Custom Made means then please ask before placing your order.
All our 3D Domed Gel products can take upto 5 working days to fully cure. We do have an advanced curing system that can cure these in as little as 24-48 hours but this is dependant on available space.
IMPORTANT TRADEMARK DISCLAIMER:
You are going to see many immediately recognisable logos on Signdezine. Signdezine is in no way associated with any of the companies whose logo appears on Signdezine. It is not our intention to appear to be associated with any of the companies nor our intention to pass ourselves off as being associated with any of them.
If you are the owner of a logo that appears on this site and take exception to seeing it here, please do contact us right away for it's immediate removal. After we have confirmed that the request is genuine, we are happy to remove the logo from this site without delay.
The size of our Round 3D Domed Gel stickers decals are in mm = wide/dia
Sizes Available: 25mm, 30mm, 34mm, 35mm, 36mm, 37mm, 38mm, 40mm, 43mm, 45mm, 46mm, 48mm, 49mm, 50mm, 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm, 59mm, 60mm, 61mm, 62mm, 64mm, 65mm, 66mm, 67mm, 68mm, 70mm, 72mm, 76mm, 78mm, 80mm, 81mm, 82mm, 83mm, 84mm, 85mm, 90mm, 100mm, 110mm, 114mm.
If you require a different size then please use the Ask a Question below.
Please note: All our 3D domed gel custom wheel badges are handmade, therefore, there may be imperfections and differences on positioning for each and every badge.
These aftermarket 3D Domed Gels are custom made to order and are not a stock item, therefore not covered by the distance selling act.
If you are unsure what Custom Made means then please ask before placing your order.
All our 3D Domed Gel products can take upto 5 working days to fully cure. We do have an advanced curing system that can cure these in as little as 24-48 hours but this is dependant on available space at the time of manufacture.