HONDA 3D Domed Gel Wheel Center Cap, Resin Over-Stickers Decals Badges Set of 4 (Custom Made)
Default Colour: Black and Chrome
You can choose from many background materials and colours including BLACK, RED, WHITE, BLUE, GRAPHITE, CARBON and GLISTENING GOLD.
The size of our Round 3D Domed Gel stickers decals are in mm = wide/dia
Sizes Available: 25mm, 30mm, 34mm, 35mm, 36mm, 37mm, 38mm, 40mm, 43mm, 45mm, 46mm, 48mm, 49mm, 50mm, 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm, 59mm, 60mm, 61mm, 62mm, 64mm, 65mm, 66mm, 67mm, 68mm, 70mm, 72mm, 76mm, 78mm, 80mm, 81mm, 82mm, 83mm, 84mm, 85mm, 90mm, 100mm, 110mm, 114mm.
If you require a different size then please use the Ask a Question below.
This is a set of 4 Round luxury aftermarket custom made 3D Domed Gel black and chrome HONDA alloy wheel center cap badges .
Made from 7 year external grade self adhesive vinyl layers and topped with a luxurious 3D Domed Gel that gives a stunning protective layer and a glossy look.
Domed stickers decals/badges are covered with up to 4mm thick, transparent, polyurethane coating for a 3D look. They are semi-flexible, scratch resistant , flat on the back and must be fitted to a clean, smooth surface but can be applied to slightly curved surfaces, if curve is greater than 1mm-2mm depth from the center to the outer edge depending on the overall diameter then additional adhesive may be required.
Some colours may appear slightly lighter when combined with our 3D Domed Gel. This is due to the light reflecting within the 3D Domed Gel coating.
Before you place your order, send an email to Matt with your ideas/designs/artwork sample attached and we shall let you know if it is possible, with a sample. If you're happy with the sample, we will then send you a design ID number that you will input into the "Custom Design File Name" box and your order will be made to that ID number. The prices shown are based on a single logo colour and a single background colour. For designs with more than two colours/layers will incure further charges.
Do not place an order until you have your unique Design ID number/Custom File Name.
IF YOU PLACE AN ORDER WITHOUT A CUSTOM FILE NAME THAT WE PROVIDE YOU, WE WILL CANCEL YOUR ORDER IMMEDIATELY. THERE WILL BE A CANCELLATION FEE OF £5.00.
Please note: All our 3D domed gel custom wheel badges are handmade, therefore, there may be imperfections and differences on positioning for each and every badge.
Please do not ask for a custom design if it is the Honda logo, WE WILL REFUSE.
We can however create custom and unique design to your specific requirements.
Why not have your name or initials (NOT HONDA), name, logo or any other Monika. Stand out from the crowd with your very own personalised branding.