Ford 3D Domed Gel Oval Custom ASBO Bonnet / Boot Badge
Default Colour: Mirrored Chrome on Black
Choose from a large selection of colours that best match your car.
You can choose from many background materials and colours including BLACK, RED, WHITE, BLUE, GRAPHITE, CARBON and GLISTENING GOLD.
The size of our Round 3D Domed Gel stickers decals are in mm = wide/dia
Sizes Available: 25mm, 30mm, 34mm, 35mm, 36mm, 37mm, 38mm, 40mm, 43mm, 45mm, 46mm, 48mm, 49mm, 50mm, 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm, 59mm, 60mm, 61mm, 62mm, 64mm, 65mm, 66mm, 67mm, 68mm, 70mm, 72mm, 76mm, 78mm, 80mm, 81mm, 82mm, 83mm, 84mm, 85mm, 90mm, 100mm, 110mm, 114mm.
If you require a different size then please use the Ask a Question below.
This is a Single Round luxury aftermarket custom made 3D Domed Gel Mirrored Chrome Ford Oval Custom ASBO Bonnet / Boot Badge.
Please do not ask for a custom design if it is any of the FORD logos, WE WILL REFUSE.
Made from 7 year external grade self adhesive vinyl layers and topped with a luxurious 3D Domed Gel that gives a stunning protective layer and a glossy look.
Domed stickers decals/badges are covered with up to 4mm thick, transparent, polyurethane coating for a 3D look. They are flexible, scratch resistant and flat on the back but can be applied to slightly curved surfaces, if curve is greater than 1mm-2mm depth from the center to the outer edge depending on the overall diameter depending on the overall diameter then additional adhesive may be required.
Some colours may appear slightly lighter when combined with our 3D Domed Gel. This is due to the light reflecting within the 3D Domed Gel coating.
Please note: these aftermarket 3D Domed Gels are custom made to order and are not a stock item, therefore not covered by the distance selling act.
If you are unsure what Custom Made means then please ask before placing your order.
All our 3D Domed Gel products can take upto 5 working days to fully cure. We do have an advanced curing system that can cure these in as little as 24-48 hours but this is dependant on available space.
IMPORTANT TRADEMARK DISCLAIMER:
You are going to see many immediately recognisable logos on Signdezine. Signdezine is in no way associated with any of the companies whose logo appears on Signdezine. It is not our intention to appear to be associated with any of the companies nor our intention to pass ourselves off as being associated with any of them.
If you are the owner of a logo that appears on this site and take exception to seeing it here, please do contact us right away for it's immediate removal. After we have confirmed that the request is genuine, we are happy to remove the logo from this site without delay.
To fit: Ford